How to sew 90° Upholstery Corners

Sewing upholstery corners can be a challenging task, especially when you need to create clean and precise 90° angles. Whether you’re working on a new upholstery project or making repairs, properly sewing the corners is essential for achieving a professional finish. In this article, we will guide you through the step-by-step process of sewing 90° upholstery corners, ensuring neat and durable results.

Table of Contents

1. Introduction
2. Preparing the Fabric
3. Marking the Corner
4. Sewing the Corner
5. Trimming and Finishing
6. Conclusion

Introduction

Upholstery corners require careful attention to detail to achieve a crisp and polished appearance. By following the steps outlined below, you’ll be able to sew 90° upholstery corners with ease, whether you’re working on cushions, pillows, or furniture upholstery.

1. Preparing the Fabric

Before sewing the corner, ensure that your fabric is cut to the appropriate size and shape. If working with upholstery fabric, make sure to measure and cut it with precision, allowing for seam allowances. Additionally, it’s helpful to press the fabric with an iron to remove any wrinkles and create a smooth surface for sewing.

2. Marking the Corner

To create accurate 90° corners, it’s important to mark the sewing line on your fabric. Using a ruler or measuring tape, measure and mark the desired distance for the seam allowance on each side of the corner. For example, if your seam allowance is 1 inch, measure and mark 1 inch along the edge of the fabric on each side of the corner.

3. Sewing the Corner

To sew the corner, follow these steps:

• Start sewing from one edge of the fabric, aligning the needle with the marked sewing line. Begin stitching a few stitches before the corner to secure the thread.
• As you approach the corner, stop stitching when you reach the marked sewing line. Leave the needle in the fabric, lift the presser foot, and pivot the fabric 90 degrees to align with the next side of the corner.
• Lower the presser foot and continue sewing along the next side of the corner. Maintain a consistent seam allowance, sewing slowly and carefully to ensure accuracy.
• Repeat the process for each side of the corner, pivoting at the marked sewing lines until you have completed sewing all four sides.

4. Trimming and Finishing

After sewing the corner, it’s important to trim the excess fabric and finish the raw edges for a clean and professional look. Follow these steps:

• Trim the excess fabric near the corner, leaving a small seam allowance. Be careful not to cut into the stitching.
• To prevent fraying, finish the raw edges by using a serger, zigzag stitch, or by folding the fabric under and stitching close to the edge.

Conclusion

90° sofa upholstery dubai requires attention to detail and precision, but with practice and the right technique, you can achieve professional-looking results. Remember to prepare the fabric, mark the sewing lines, sew carefully around the corner, and trim and finish the edges for a polished appearance. Whether you’re working on cushions, pillows, or furniture upholstery, following these steps will help you sew 90° upholstery corners with confidence and achieve a neat and durable finish.