If you’re a regular user of the Lookah electric dab rig, you know how essential it is to keep it functioning at its best. A key part of this maintenance is replacing the coils, which can degrade over time with regular use. Fear not! This guide will walk you through the process of replacing the coils in your Lookah electric dab rig, ensuring you enjoy smooth and flavorful hits every time.

Gather Your Supplies

Before you start, ensure you have all the necessary supplies. You’ll need:

• Replacement coils compatible with your Lookah electric dab rig model
• Cotton swabs
• Isopropyl alcohol (90% or higher)
• A small screwdriver (if needed)
• A clean, dry cloth

Having these items on hand will make the coil replacement process smooth and hassle-free.

Power Down and Disassemble

The first step in replacing the coils is to power down your device. This step is crucial for safety and to prevent any damage to your rig.

• Turn Off the Device: Make sure your Lookah electric dab rig is powered off.
• Remove the Battery: If your device has a removable battery, take it out to avoid any accidental activations.
• Disassemble the Rig: Carefully disassemble the rig, separating the mouthpiece, coil, and base. Place each component on a clean, dry surface.

Remove the Old Coil

Once your device is disassembled, you can proceed with removing the old coil.

• Unscrew the Coil: Using your fingers or a small screwdriver, unscrew the old coil from its base. If the coil is stuck, gently wiggle it until it loosens.
• Inspect the Coil: Check the old coil for signs of wear and tear. If it’s burnt or covered in residue, it definitely needs replacing.

Clean the Components

Before installing the new coil, it’s essential to clean the various components of your rig to ensure optimal performance.

• Clean the Base: Dip a cotton swab in isopropyl alcohol and gently clean the base where the coil sits. This step helps remove any leftover residue.
• Clean the Mouthpiece: Clean the mouthpiece using a cotton swab dipped in isopropyl alcohol. Ensure it’s completely dry before reassembling.

Install the New Coil

With everything clean and ready, you can now install the new coil.

• Insert the New Coil: Screw the new coil into the base of your Lookah electric dab rig. Ensure it’s securely fastened but avoid overtightening, which can damage the threads.
• Align the Coil: Make sure the coil is aligned correctly with the airflow holes to ensure even heating.

Reassemble the Rig

Now that the new coil is installed, it’s time to reassemble your Lookah electric dab rig.

• Reconnect Components: Attach the mouthpiece and any other disassembled parts back to the rig.
• Reinsert the Battery: If you removed the battery earlier, reinsert it into the device.

Test the Device

Before using your Lookah electric dab rig, it’s important to test it to ensure everything is functioning correctly.

• Power On the Device: Turn on your Lookah electric dab rig and check if it heats up properly. If it does, you’re ready to go.
• Perform a Dry Burn: Without adding any concentrate, perform a dry burn by activating the device. This step helps burn off any residual alcohol and ensures the coil is working correctly.

Maintenance Tips

To extend the lifespan of your new coil and keep your Lookah electric dab rig in top condition, follow these maintenance tips:

• Clean Regularly: Regular cleaning prevents residue buildup and ensures optimal performance.
• Avoid Overloading: Don’t overload the coil with too much concentrate. Use the recommended amount to prevent clogging and burning.
• Monitor Battery Levels: Ensure your device is adequately charged for consistent performance.

Conclusion

Replacing the coils in your Lookah electric dab rig is a straightforward process that significantly improves your dabbing experience. By following this guide, you can easily maintain your device, ensuring it delivers flavorful and smooth hits every time. Regular maintenance and proper care will keep your Lookah electric dab rig performing at its best for years to come.